Home > Products > Flow Meter > ultrasonic flow meter >

Wall mounted ultrasonic flow meter

Accuracy:±1%

Repeatability:±0.2%

Easy to install outside the pipe

Two line display: Instantaneous flow rate,Accumulate flow,status

Built-in printer,to print in time and regularly;

Standard interface RS485 for data output and on-line operation

Self-diagnose to show the current status

INQUIRY

This is brief introduction for wall-mounted ultrasonic flow meter

1.transducers include clamp-on type,insertion type,in-line type.

2.These series products have gained the best sales volume in our company,and are the favorable products in future

3.applied to measure on-line differents liquids in industry spot.

4. DN15~DN6000 wall mounted ultrasonic flow meter

5. ISO,CE,SGS certificates for export

6. More 80% meters for export

Below is mainly features for wall-mounted ultrasonic flow meter.

1.Repeatability better than 0.2%.accuracy:better than 1%

2.Display:2*20 backlit LCD(Chinese and English optional)

3.Operating power: AC 85—264V or isolation DC 8-36VDC

4.Transducer: clamp-on type,insertion type,in-line type

5.Protection:mainframe:IP65, transducer:IP:68

6.signal output: one channel standard isolation RS485 output;

7.One channel isolation 4-20mA or 0-20mA active output;

8.One channel OCT output(programmed between the pulse width(6-1000ms),default before leaving factory (200ms)

9.One channel isolation relay output,with positive ,negative,net accumulation pulses and different alarm signals.

10.Input:two channel three wire system PT100 platinum resistor input loop,to make heat meter has the function of displaying heat quantity. Three channel 4-20mA input optional,accuracy:0.1%,has the ability to 11.input the signals of pressure, liquid level, temperature and so on.

it can display calory by heat module

This is various sensors and support for wall mounted ultrasonic flow meter.

Data	S1Z	M1Z	S1	M1	L1	S1H	M1H
Pipe size	15-100	50-700	15-100	50-700	300-6000	15-100	50-700
Material	Aluminum Alloy		ABS			Special material for hi-temp
Frequency	1MHz
Installation	V(N,W)flange	V,Zflange	V(N,W)flange	V,Zflange	Zflange	V(N,W)Flange	V,Z flange
Calibration	Calibrated together with flowmeter
Magnetic	yes					no
Temperature	0°C-70°C					0°C-160°C
IP	IP65
Outsize	200×25×25	280×40×40	45×30×30	60×45×45	80×70×55	90×85×24	90×82×29
WT(g/pair)	250	1080	75	250	650	94	150
Medium	Water,sea water,sewage,Alcohol,oil etc
Turbidity	≤10000ppm with little air bubble
Pipe	Carbon steel stainless steel,cast iron,Brass,PVC,Aluminum etc.
Pipe inner	Rubber,Slurry,PP,PS,bakelite, PTFE
Signal cable	standard:5M×2,optinal:10M×2 or 15M×2...