What kind of flow meter is suitable for controlling the mixing ratio of polyurethane adhesive?
sales01@cxflowmeter.com
As you know, CIXIFM
micro gear flow meters can measure many medium such as diesel oil, Hydraulic oil, grease, skydrol, lubricating oil, offset ink, perfume,
clear lacquer, cavity waxes and Polyurethane adhesive resin.
One of our Brazil customer ask us to give him a solution about how to control the mixing ratio of Polyurethane adhesive by
flow meters.
They are doing a job together with SIkaflex to apply a polyurethane(medium) based adhesive in the mixing ratio of 10: 1 (data sheet attached) the volume to
be applied is 50 grams per piece.
This is the spoiler of the in the car of the Volkswagen released month, as this adhesive does not allow the variation of the mixture so they have the idea of test
with two flow meters installed before the mixer controlling by means of electric pulses the speed of the
gear pumps by means of servo drivers.
They need to build equipment to apply adhesives, buy the robots and build the glue cell and the flow meter to control the variations of the mixture, to ensure
that there is a change of temperature.
G0.015 model main specification as follows:
CX-G0.015-B-AL
Flow range:0.005-5L/minAccuracy:0.5%
Working temperature: -30~80C
Working pressure: 200bar
Output:pulse(hall sensor or reed switch)
Power: 4-26VDC
Housing material: anodized aluminum
Gear material: SS316L
It can high accuracy measure the Polyurethane adhesive. it is big circular gear and not easy blocked.
Features of G series gear flow meter.
High accuracy: 0.5% and 0.2%
High pressure: 1000bar
Large range ratio: 100:1
High temperature: 250C
Main application:
Sealant/Adhesive Dispensing
Fluid Fill
Automotive Paint
Hydraulic test stand
Common rail test bench
If you are also looking for a
precision flow meter with high viscosity and low flow, please contact winny:
sales01@cxflowmeter.com
