Ultrasonic Open Channel Flow Meter

Wall Mounted Open Channel Flow Meter CX-ULM-MF




Brief introduction:
It consists of two elements, a host, which has display and an integral keypad for programming, and a transducer, which must be mounted directly
above the surface to be measured. It can be widely applied to the environmental protection, water treatment, irrigation, chemical, and other industries.
Application:
 Right-angle rectangular weir,
Triangular weir,
Width weir,
Parshall flume



Features:
Low sensor power consumption, easy installation and orientation, application wildly ,standard 4-20mA output, use it separately as liquid level meter 
Easy operation, widely used in thin plate right-angle weir, triangular weir, parshall flume and so on. When power off, it can save 10 years.
Base on user's demand, it can attach flash disk, micro printer and storage battery. 


Specification:
（1）Flux range ：0~9999999 (Full eight cleared and the cumulative number plus 1)
（2）Instant flux: 10L/s～10m³/s(based on wire type and size)
（3）Accuracy:5%
（4）Sensor range:3m、
（5）sensor blind area：0.4m
（6）sensor precision ：±0.5%F.S
（7）display：ＬＣＤ
（8）liquid level resolution：1mm
（9）keyboard：16
（10）signal input：transducer
（11）output(optional)： 4-20mA / RS485/232(Modbus)/
（12）work voltage：AC220V or DC12~24V
（13）consumption：<3W
（14）material：ABS for instrument、ABS for sensor
（15）main instrument size：180mm*160mm*76mm/168mm*130
（16）sensor size：Φ74mm×137mm×M60     
（17）sensor installation size：M60×2
（18）sensor cable：10m
（19）work surrounding：normal
（20）protection degree：IP53 for main instrument    
     IP65 for sensor(higher degree optional）
（21）data scan：check hour, day, week, year flux record.






Handheld Ultrasonic Open Channel Flow Meter CX-ULM-MSA


 Brief introduction:
It consists of two elements, a host, which has display and an integral keypad for programming, and a transducer, which must be mounted directly above
the surface to be measured. It can be widely applied to the environmental protection, water treatment, irrigation, chemical, and other industries.
Application:
 Right-angle rectangular weir,
Triangular weir,
 
Width weir,
Parshall flume
Features:
Low sensor power consumption, easy installation and orientation, application wildly ,standard 4-20mA output, use it separately as liquid level meter 
Easy operation, widely used in thin plate right-angle weir, triangular weir, parshall flume and so on. When power off, it can save 10 years.
Base on user's demand, it can attach flash disk, micro printer and storage battery. 
Specification:
Sensing range：　0~5m   
Output ：USB(8G SD card)
GPRS(optional)
Blue tooth (optional)        
Max error：■±0.3%,
Current max load impedance：150Ω
Sensor frequency：200～2000KHz（optional）
Material: ABS
Work temperature：normal  
Work pressure：normal
Display ：ＬＣＤ
Display resolution：1mm
Key board ：5 sensitive key
Sensor cable diameter 5～10mm×1.5m（optional）
Main processor dimension：200×100×75(mm)
Power：1.5V AA battery×５ or DC 5V
Idle  consumption：<0.5W
Work  consumption：<3W