How to choose a gas turbine flow meter

[email protected]

The gas turbine flow meter adopts double-row liquid crystal on-site display. It is a new type of intelligent instrument that integrates turbine flow sensor and display
and total calculation developed by using advanced ultra-low power consumption single-chip microcomputer technology. So how should the gas flow meter turbine flowmeter
be selected? Choose the gas turbine flowmeter that suits you to make the flow measurement accurate.

 

The selection of gas turbine flowmeters is generally considered from the following aspects:

 

Accuracy level, turbine flow meter is mainly selected for its high accuracy

 

Second, the density of the gas: on the gas turbine flowmeter, the influence of the physical properties of the fluid is mainly the gas density, which has a greater
impact on the meter coefficient, and is mainly in the low flow area. If the gas density changes frequently, corrective measures should be taken to the flow coefficient of the flowmeter.

 

Third, pressure loss: try to choose a turbine flowmeter with a small pressure loss. Because the pressure loss of the fluid passing through the turbine flowmeter is smaller,
the energy consumed by the fluid from the input to the output pipeline will be less, that is, the total power required will be reduced, which can greatly save energy, reduce transportation costs, and improve utilization. .

 

Fourth, there are two types of pipe connection, horizontal and vertical.

 

Fifth, choose the installation method according to the environmental conditions, and consider the influence of temperature and humidity.

 

Sixth, the bearing material of the turbine flowmeter.

 

Seventh, the structure required by the turbine flow meter.


If you want to know more about gas turbine flow meter more model parameters and quotation, please contact winny:[email protected]