Selection of external clamping ultrasonic flowmeter

In the selection of ultrasonic flow timing, pipe wall thickness, diameter, measurement medium, measurement medium temperature, precision requirements, measurement medium for the vapor, but also must understand the working pressure of the vapor, in addition, according to the specific situation of the customer and measurement must be effective motor selection.

External clamp ultrasonic flowmeter

1. Pipe diameter size

If the measured pipe diameter bottom is below DN15mm, it is good to choose imported ultrasonic flowmeter. At the present stage, domestic ultrasonic flowmeter is aimed at small pipe diameter measurement, which cannot meet the technical standards.

2. Medium temperature

When the measuring medium is normal temperature, you can choose domestic ultrasonic flowmeter. When the temperature is between 120 and 200 degrees, you should also choose imported ultrasonic flowmeter. When the temperature is above 200 degrees, you should choose French FLEXIM ultrasonic flowmeter.

3. Accuracy requirements

If the customer for high precision, side should be imported ultrasonic flowmeter.

4. Steam ultrasonic flowmeter

If the medium measured by the customer is vapor or with a small amount of water, the side needs to choose the ultrasonic flowmeter with dual use of vapor, before China, only the French flexen enterprise has dual use of vapor and liquid table.If there are these aspects of industrial and mining enterprises, can consult Shanghai senyi intelligent instrument equipment co., LTD. Professional technical personnel.

Porcelain city flowmeter after hundreds of working medium, the service life of more than 8 years, and without secondary calibration, since it was founded, the porcelain city instrument is determined to do the world first-rate flowmeter, breaking the monopoly of the industry, international brand in the flowmeter to customers in the domestic can buy real German quality domestic flow meter.