What are the advantages of electromagnetic flowmeter

What are the advantages of electromagnetic flowmeter, in the case of dry mania operation pump will damage parts or cause cavitation in centrifugal pumps.Replacement parts can add up to more than a thousand dollars.This cost does not include the shutdown time when the pump operation is not efficient or is detrimental to manufacturing or operation.

Technology for pump protection

Many technologies can perform pump protection.The steam flowmeter can be applied, but it is not always necessary to continuously measure the flow, which is generally more expensive than switching.The total flow switch of mechanical equipment shall start the relay by actual operation of mechanical equipment.Little imagine, change subsequently time, move component will be damaged and promote maintain, and if have mucous liquid or accumulation, the credibility of criterion switch will suffer bad harm.

Tuning forks and ultrasonic flowmeters are some of the other techniques used for pump protection.The deterministic fork or gap in the technique must be wet or dry to be tested.As a result, they were unable to detect a decrease in the total flow, and the opening of the mouth created an interior space that would be blocked.

Why choose electromagnetic flowmeter

Electromagnetic flowmeter can be ideally applied to pump protection.The basic principle of electromagnetic flowmeter is similar to that of rapid mass flowmeter.Fluid dynamics transfers heat from the top of the electrode, thereby reducing the temperature difference between the thermal resistance temperature detector (RTD) and the reference RTD.Then the temperature difference increases or decreases due to heat conduction, achieving the preset value and turning off the power of the car relay.The manufacturer will reference the switch at the set point in the "alarm" situation.How automotive relays are wired (nc-co or no-co) depends on the application requirements.High or low total flow can be checked against the thermal diffusion switch.

According to the heat pipe heat dissipation, customers can get ** strong role and coordination ability.The advantages of the technology include: no moving parts, less and less maintenance must be done;Many camera types apply water or thicker liquid mounted on the horizontal plane or bisector, remove the upper dead point must be installed;Electable remote control installation of electronic components;Internet hotspot options available;Reverse with main tube, low total flow test;Current output of development trends and common fault markers;Temperature compensation can reduce the shift of the operating temperature under the set point drift.

Porcelain city Shanghai instruments co., LTD., founded in 2011, founded by former Siemens engineers MrStone, specializing in high quality, high precision, high frequency, high temperature, high pressure, wide range of flow meter research and development production, production strictly enforce the ISO9001 standards, the use of independent research and development of technology, substitute the gaps in China's small flow meter, the product can completely replace the Max, KRACHT (clark), OVAL and other international brands.