Introduction of urea solution level meter

Zui significant characteristics of urea solution urea level gauge, level gauge is liquid medium with indicator is completely isolated, so in any case, is very safe, reliable, durable, and various types of liquid level meter with liquid level alarm, control switches, and implementation level or the position of the upper and lower limit offside control or alarm, interlock, or dry reed - with static pressure type fluid shift delivering resistance type liquid level transmitter, liquid level, the position signal can be converted into two wire standard 4-20 madc signal, realizes the remote indication, test, record and control.

Lining selection of urea solution level gauge:

Stainless steel lined anti-corrosion magnetic flip plate liquid level meter USES stainless steel body lined with polypropylene (PP) and PTFE process, has a high structural strength and corrosion resistance, can be applied to hydrochloric acid and other acidic liquid, alkaline liquid and organic solvents.But it is not suitable for the measurement of concentrated nitric acid, chlorine-containing solvent, aromatic agent, aliphatic group and other medium liquid.The side lining anti-corrosion magnetic flip plate liquid level meter has two kinds of stainless steel main lining PTFE and stainless steel lining polypropylene (PP), suitable for the measurement of corrosive media.

PTFE is suitable for measuring the liquid level of corrosive media with high working temperature. It adopts the advanced new technology of polytetrafluoroethylene drawing flanging with stainless steel lining, with reliable structure and long service life.It is an excellent choice for liquid level measurement of highly corrosive media such as hydrofluoric acid.

Side mounted lined with magnetic flap type level gauge (PP) is suitable for the hydrochloric acid and dilute sulphuric acid, inorganic kind of corrosive liquid measurement, due to the imported high strength with metal, especially the PPR unique heat preservation, this product is suitable for outdoor water tank level measurement, internal will not freeze in winter. But not as PTFE lining type heat resistance and compression performance is good, the temperature and pressure is lower to choose the high cost performance products.

Application and scope of urea solution level gauge:

Ak-uhz-p common float level meter is a kind of local display instrument, widely used in petroleum, chemical industry, electric power, light industry, environmental protection and other departments, to open or pressure vessel liquid level continuous display.Anticorrosive ak-uhz-f is especially suitable for corrosive and toxic liquid level measurement indicators (working pressure ≤ 1.6mpa;Measuring range ≤2m).Heat tracing ak-uhz-r is suitable for measuring liquid medium with high viscosity, high temperature or low temperature (this instrument needs heat tracing device).High temperature ak-uhz-t is suitable for continuous measurement of liquid level in liquid medium with vessel pressure less than 10Mpa and temperature between 200℃ and 450℃.High pressure ak-uhz-y is suitable for measuring liquid level of liquid medium in a closed container with temperature below 200℃ and process pressure above 10Mpa (below 20Mpa).High temperature and high pressure ak-uhz-h is suitable for measuring liquid level of liquid medium in a closed container with temperature higher than 200℃ and process pressure higher than 10Mpa (below 20Mpa).Explosion-proof ak-uhz-b is suitable for remote transmission of electrical signals in inflammable and explosive environment. The meter is equipped with 4mA ~ 20mA current signals or liquid level transmitters with upper and lower alarm Settings and other electronic devices.Top mounted ak-uhz-d is suitable for all kinds of underground fluid storage tanks and can display liquid level on the ground.Not suitable for strong vibration and strong magnetic workplace (working pressure ≤ 1.6mpa;Measuring range ≤2m).