Electromagnetic flux counts the difference between body type and body type

Type electromagnetic flowmeter，Electromagnetic flowmeter is divided into integral electromagnetic flowmeter and integral electromagnetic flowmeter.Electromagnetic flowmeter is based on Faraday electromagnetic induction law to measure the volume flow of conductive medium in the tube induction meter.

Selection instructions:

1. Select the appropriate type according to the characteristics of the integral type and the separation type electromagnetic flowmeter.The first type of electromagnetic flowmeter is easy to install and lay lines, with medium accuracy.Separation type electromagnetic flowmeter, higher degree, converter and sensor installation, more suitable for the site environment is poor (such as harmful, toxic, easy to be flooded by water and other places) occasions, but the installation, wiring is more strict, otherwise easy to introduce interference signals

The place that asks to the accuracy is higher commonly basically has the raw material measure that enters the factory and enters production device, the finished product measure that gives device and ex-factory sale, the measure of raw material of technological formula, costly material is measured.

The gas (air, nitrogen, steam) on the public works in the production usually USES the vortex section flowmeter, all kinds of water mainly USES the electromagnetic flowmeter, these two choices are economical and can meet the precision requirements.The place that asks to the accuracy is higher commonly basically has the raw material measure that enters the factory and enters production device, the finished product measure that gives device and ex-factory sale, the measure of raw material of technological formula, costly material is measured.

Electromagnetic flowmeter product details:

1. The instrument has simple and reliable structure, no understandable parts and long service life;

2. No flow blocking parts, no pressure loss and fluid blockage;

3. The measurement accuracy is not affected by the type of medium being measured and its physical parameters such as temperature, viscosity, pressure, etc., with high accuracy;

4. Different combinations of ptfe lining and HC, HB, 316L and titanium electrode materials can be used to measure the flow rate of different media with a range of 20:1 and 50:1.

Structure classification of electromagnetic flowmeter:

Electromagnetic flowmeter: the converter and the sensor are directly assembled into a whole, inseparable.It is often used in the field with good environmental conditions.

Electromagnetic flowmeter of different types: the converter forms a product through a special cable and sensor. The sensor is installed on the spot and the converter is installed in a good place.It is often used in places with poor environment, such as Wells, high temperature, and places where personnel are not easy to reach.